Skip to main content

Commonly used tin ore washing and grading equipment

The tin ore beneficiation process is roughly divided into four links: crushing, pre-selection, flotation, and re-selection. The connection between each stage is appropriate. Only when the equipment configuration is reasonable, the whole process of tin ore beneficiation technology will be smoother and more convenient to operate.


1. Crushing and screening


The nature of the tin ore is relatively simple, and a simple one-step crushing with a jaw crusher can achieve good results. The ore is crushed to 20mm, and then screened into two particle sizes of 20-4mm and 4-0mm. After crushing, the tin ore particles are uniform in size, beautiful in shape, and without over-crushing, providing high-quality raw materials for the next link, reducing the load of the grinding equipment, and having a good promoting effect on improving the grade of tin concentrate.


2. Pre-selection


The 20-4mm ore enters the heavy medium cyclone for pre-selection, and then after a rod mill, the jig is used for pre-selection. The jig tailings are screened with a 2mm vibrating screen, and +2mm is screened out as waste tailings, and -2mm enters the shaking table for selection.


3. Mixed flotation


After the tin ore separated by jigging and shaking table is re-grinded, mixed flotation is carried out, and the tailings of mixed flotation are sent to the shaking table for selection to produce qualified tin concentrate.

Comments

Post a Comment

Popular posts from this blog

The difference between quartz and mica

Mica and quartz are common minerals that play an important role in mineralogy. Although they are both silicate minerals, there are clear differences between them. First, mica and quartz are very different in appearance. One of its distinguishing features is that mica exhibits a layered structure that can be easily peeled off into thin flakes. Quartz, on the other hand, is a uniform crystal with no layered structure. Additionally, mica is usually dark in color, such as black, brown, or green, while quartz is usually clear or white. Secondly, mica and quartz also differ in their physical and chemical properties. The hardness of mica is usually between 2.5 and 4, which is relatively easy to be scratched; while the hardness of quartz is very high, 7, which is a very hard mineral. In addition, mica has good refractive properties and electrical properties, while quartz is an excellent piezoelectric material.
Post a Comment
Read more

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.
Post a Comment
Read more

Slove method of the clogging of trommel screen sieve

The drum screen is a simple screening device.  The trommel screen  is easy to close and collect dust, the maintenance is small, the maintenance is simple, and the service life is long. It is a device frequently used in refractory materials, coal, river sand classification, and sandstone classification. The advantage of the trommel screen is that the structure is not complicated so that the device can be quickly operated, and when the trommel has problems, people can easily solve it. But what should I do when the screen of the trommel screen is blocked? The following screen will introduce several ways to solve the phenomenon of blocking the net. The trommel screen sometimes adopts a mechanism added to the fixed frame, and then the mechanism rotates to drive the belt mounted on the belt to continuously smear the surface of the sieve hole, thereby sucking out the raw material particles blocked in the sieve hole. One of the disadvantages in practice is that it produces a lot ...
Post a Comment
Read more