Coal washing mud water treatment method

The washing process of Shaping Coal Washing Plant includes unclassified raw coal jigging sorting + coarse coal mud interference bed sorting machine sorting + coal mud flotation treatment-concentrated filter tailings and other processes. Therefore, the coal washing plant mainly produces coal mud water through pipeline dripping water, classification, desludging screen water, centrifugal dehydrator centrifugal liquid, final coal desludging screen water, jigging coal mud water desludging screen water and other processes.

If the slime concentration in the slime water is low, the slime recovery equipment and process cannot be used. In order to effectively recover the slime in the slime water, the coal washing plant generally chooses to concentrate the slime. The slime concentration equipment currently used in coal washing plants is usually a natural sedimentation type. Some will add chemical agents to promote slime concentration. The high-concentration slime slurry will be discharged from the bottom of the concentration equipment, and the overflow water containing very little slime will overflow from the top; ④ Whether the washing process is effective depends on the quality of the circulating water. Before the circulating water, it is an important process to clarify the circulating water by reducing the particles and ash in the slime water.

Comments

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.

How to build a sand and gravel aggregate production line

High-quality aggregates (coarse aggregates and fine aggregates, fine aggregates are sand): First, the shape of the particles should be good, and the senses should be good; second, the gradation should be reasonable. Especially for machine-made sand, high-quality machine-made sand products must not only meet the sand requirements of commercial concrete, but also meet the requirements of higher standards for ready-mixed mortar sand (ready-mixed mortar is an inevitable requirement in the future. On-site stirring will be phased out over several years). Reasonable continuous grading can meet the needs of high-quality concrete. Both are indispensable. The fifth condition for the success of the sand and gravel aggregate production line is that the aggregate product of the production line must meet the requirements of soil content. High-quality concrete has higher and higher requirements for soil content. The seemingly simple problem may be the reason for the failure of the project. Ther...

sunset

Search This Blog