How to build a sand and gravel aggregate production line

High-quality aggregates (coarse aggregates and fine aggregates, fine aggregates are sand): First, the shape of the particles should be good, and the senses should be good; second, the gradation should be reasonable. Especially for machine-made sand, high-quality machine-made sand products must not only meet the sand requirements of commercial concrete, but also meet the requirements of higher standards for ready-mixed mortar sand (ready-mixed mortar is an inevitable requirement in the future. On-site stirring will be phased out over several years). Reasonable continuous grading can meet the needs of high-quality concrete. Both are indispensable.

The fifth condition for the success of the sand and gravel aggregate production line is that the aggregate product of the production line must meet the requirements of soil content. High-quality concrete has higher and higher requirements for soil content. The seemingly simple problem may be the reason for the failure of the project. There is more rain in the south and water shortage in the north. Some mines contain less soil on the surface, some contain more soil, and some There are top layers of soil, and so on. Different processes need to be adopted in different situations, otherwise it will cause the failure of the project or increase the huge cost of post-transformation.

The ore characteristics of the mine determine many quality characteristics of the finished sand and gravel products in the future, which cannot be changed by changing the process flow of the production line, such as the strength index and the content of the needle-like finished products, which are also largely related to the characteristics of the ore. Alkali active substance content, mud content, etc.

Comments

How to desilting municipal drains and canals?

The river channel sludge filter press is a special equipment, which is used to deal with river channel dredging sludge, lake sludge and sludge brought ashore by cutter suction boats. The equipment adopts the principle of automatic water removal and extrusion dehydration. First, the sludge is introduced into the equipment through a slurry pump, and after pressing and squeezing, the output is clear water and mud cake. This treatment method does not require manual unloading, and the moisture in the mud cake is effectively removed, which can be directly packaged and transported, and the clean water produced can be directly discharged. Automatic processing: The equipment adopts an automatic control system to realize automatic water removal and extrusion dehydration without manual operation, which greatly saves labor costs and time.

Slove method of the clogging of trommel screen sieve

The drum screen is a simple screening device. The trommel screen is easy to close and collect dust, the maintenance is small, the maintenance is simple, and the service life is long. It is a device frequently used in refractory materials, coal, river sand classification, and sandstone classification. The advantage of the trommel screen is that the structure is not complicated so that the device can be quickly operated, and when the trommel has problems, people can easily solve it. But what should I do when the screen of the trommel screen is blocked? The following screen will introduce several ways to solve the phenomenon of blocking the net. The trommel screen sometimes adopts a mechanism added to the fixed frame, and then the mechanism rotates to drive the belt mounted on the belt to continuously smear the surface of the sieve hole, thereby sucking out the raw material particles blocked in the sieve hole. One of the disadvantages in practice is that it produces a lot ...

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...

sunset

Search This Blog