The service life of the vibration motor determines the operating life of the entire screen. Therefore, in the normal production, we must always pay attention to whether the working state of the vibrating screen equipment is normal, whether the vibrating motor is in good working condition, timely check and solve some small abnormalities and faults, and do a good job of cleaning and maintenance, because this can greatly increase the vibration screening. Machine and vibration motor life.
Maintenance storage precautions during vibrating screen motor operation
The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content.
1. It is necessary to pay attention to whether the vibration is abnormal during the use process;
2. Always check if the bolts used in the motor foot are loose;
3, dust will affect heat dissipation, always check and clean;
4. Is the shield of the eccentric block position tight and loose?
5. The bearing is regularly lubricated and repaired once a year;
6, in the use of the process has found abnormalities should be stopped in time to check.
The vibration motor should not be damp, so it should be placed in air dry, no bad gas, not in the place where the dust is too large, the temperature should be moderate, the humidity should not exceed 50%, keep it flat, and check the vibration motor for rust and moisture.
Three inspections required before the vibrating screen motor is operated
The vibration motor power supply is not connected, check whether the power circuit switch, junction box, etc. have breakpoints and repair them in time.
The vibration motor overcurrent relay is adjusted too small, and the adjustment relay is customized to match the motor.
Check if the wiring is wrong
Maintenance storage precautions during vibrating screen motor operation
The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content.
1. It is necessary to pay attention to whether the vibration is abnormal during the use process;
2. Always check if the bolts used in the motor foot are loose;
3, dust will affect heat dissipation, always check and clean;
4. Is the shield of the eccentric block position tight and loose?
5. The bearing is regularly lubricated and repaired once a year;
6, in the use of the process has found abnormalities should be stopped in time to check.
The vibration motor should not be damp, so it should be placed in air dry, no bad gas, not in the place where the dust is too large, the temperature should be moderate, the humidity should not exceed 50%, keep it flat, and check the vibration motor for rust and moisture.
Three inspections required before the vibrating screen motor is operated
The vibration motor power supply is not connected, check whether the power circuit switch, junction box, etc. have breakpoints and repair them in time.
The vibration motor overcurrent relay is adjusted too small, and the adjustment relay is customized to match the motor.
Check if the wiring is wrong
Comments
Post a Comment