Vibrating Feeder working principle

Vibrating feeder also called vibratory feeder is made of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator consists two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. By drive of the motor, the two eccentric shafts start rotating to generate a linear huge power which forces the feeder to vibrate back and forth. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller material will fall down, avoiding the further crushing, so screening purpose is reached.

Product Features

1.Smoothly vibrating and long service life.

2.Vibrating force adjustable, easy to operation.

3. Low noise and power consumption.

4. Simple structure, easy to maintenance.

Comments

Maintenance and storage method of vibrating screen motor and common troubleshooting

The service life of the vibration motor determines the operating life of the entire screen. Therefore, in the normal production, we must always pay attention to whether the working state of the vibrating screen equipment is normal, whether the vibrating motor is in good working condition, timely check and solve some small abnormalities and faults, and do a good job of cleaning and maintenance, because this can greatly increase the vibration screening. Machine and vibration motor life. dewatering screens supplier Maintenance storage precautions during vibrating screen motor operation The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content. 1. It is necessary to pay attention to whether the vibration is abnormal during the use process; 2. Always check if the bolts used in the m

What equipment is used for kaolin screening

Because kaolin is easy to disperse and suspend in water, the screening process of kaolin vibrating screen is wet screening. First, the kaolin ore is made into a slurry of micron-level or smaller unit particles, and a dispersant is appropriately added to make the minerals in the water. Dissociation, so that the high collar stone and impurity minerals in the kaolin will be divided into three different grades of fine, medium and coarse, and then the pure kaolin ore will be sieved out through the grading action of the vibrating screen. This series dewatering screen output lower water content kaolin, hot sell in the market. LZZG use PU screen as its new type sand washer sieve, because its long service life and not easily blocked in screening. When processing coal mud or dirt mixed water, steel mesh is easily blocked and adjusting its mesh size will highly reduce its capacity. Technical parameters Model Feed Size (mm) Capacity (t/h) Screen Panel (mm) Screen Area (m²) Power (kw) Weight (kg)

lowcost sand washing waste water treatment system

Low-cost sand washing production wastewater and sludge treatment project overview: The sand washing wastewater is 300m3 / d and the sludge is 30m3 / d. The main production of construction water washing sand primary products. A water-washing sand production line with a daily production capacity of 150 tons will crush, screen, and wash nearby sandstone, silica, etc. to produce construction water-washing sand products. The main environmental pollution problem in the production process of the project is the sludge wastewater and domestic sewage generated by washing sandstone and silica rock. According to the requirements of relevant laws and regulations, sand and stone washing wastewater and domestic sewage must be discharged or recycled after treatment, and the washing sludge should be properly disposed of. The tailings can be exported as good paving gravel. Total wastewater: about 300 m3 / d of washing production wastewater. The main pollutants are characterized by a larg

sunset

Search This Blog