Skip to main content

Dewatering screen polyurethane panels manufacturer in China

 Polyurethane screen contain highly wear-resistant polyurethane material with steel wire. Polyurethane elastomer is a new type of polymer synthetic material between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. It was used in dewatering screen, to remove water for wet materials.


Customized Applicable Polyurethane Screen Dewatering Screen Vibrating Screen Screen.



Polyurethane screen panel for dewatering screen

product advantages

1. Good wear resistance and long service life. Its wear resistance is 3~5 times that of steel sieve plate, which is more than 5 times that of ordinary rubber sieve plate.


2. The maintenance workload is small, and the polyurethane sieve plate is not easy to damage. And the service life is long, so the maintenance amount. And the maintenance and repair loss can be greatly reduced.


3. The total cost is low, although the same specification (area) of the polyurethane sieve plate is higher than the one-time investment of the stainless steel sieve plate (about 2 times).  But the life of the polyurethane sieve plate is 3 to 5 times that of the stainless steel sieve plate, and repair and replacement. The number of times is small, so the total cost is not high and economically very cost-effective.


4. Corrosion-resistant, non-flammable, non-toxic and tasteless.

5. Due to the reasonable design of the mesh holes, the manufacturing process of the sieve plates is unique, and the particles of the limit size do not block the mesh holes.

sand washer and dewatering screen all in one machine




Polyurethane sieve panel


Polyurethane Sieve Plate Parameters

Dewatering sieve panel 1 (mm) 305*305

Dewatering screen panel  2(mm) 500*500

vibrating screen panel  3(mm) 600*600

Dewatering screen panel 4(mm) 400*750

Dewatering screen panel 5(mm) 600*750


You can customize Screen size, mesh size

Comments

Popular posts from this blog

River Water Cyclone Desander

 A cyclone desander is a sand removal device that combines cyclone flow and filtration. It is primarily used to remove solid particles and sediment from groundwater, including groundwater and other water sources. It is suitable for water-source heat pump systems, central air conditioning circulating cooling water, chilled water systems, winter heating and cooling circulating water systems, and industrial cooling circulating water systems. It is widely used in many industries, including the chemical, environmental protection, and food industries, achieving remarkable results in water treatment, including sand removal, turbidity reduction, solid-liquid separation, and sediment separation. Cyclone Desander Concept: A cyclone desander, also known as a cyclone desander or desander, is a device that uses the principle of screening solid particles in the medium as they rotate within the desander. Combining cyclone flow and filtration, it achieves remarkable results in water treatment, in...

Water-Saving Sand Washing Plant

Choosing water-saving equipment and integrating recycling functions is the key to fundamentally reducing water consumption. Select advanced sand washing equipment Bucket-type sand washing machine: The structure is simple, with almost no wearables except for the screen, and the failure rate is low. It adopts a circulating water cleaning method and is one of the relatively more water-efficient mainstream choices currently. Integrated sand washing equipment: This type of equipment integrates sand washing, fine sand recycling, dehydration, and even wastewater treatment functions into one, significantly simplifying the process flow. For example, some new equipment uses built-in bubble flushing technology to improve the flushing effect and avoid secondary cleaning waste caused by incomplete cleaning. Mandatory water recycling system Modern sand washing equipment usually comes with a water recycling system, which can collect, filter, and reuse water during the cleaning cycle. This approach ca...

The difference between quartz and mica

Mica and quartz are common minerals that play an important role in mineralogy. Although they are both silicate minerals, there are clear differences between them. First, mica and quartz are very different in appearance. One of its distinguishing features is that mica exhibits a layered structure that can be easily peeled off into thin flakes. Quartz, on the other hand, is a uniform crystal with no layered structure. Additionally, mica is usually dark in color, such as black, brown, or green, while quartz is usually clear or white. Secondly, mica and quartz also differ in their physical and chemical properties. The hardness of mica is usually between 2.5 and 4, which is relatively easy to be scratched; while the hardness of quartz is very high, 7, which is a very hard mineral. In addition, mica has good refractive properties and electrical properties, while quartz is an excellent piezoelectric material.