Slime dewatering machine, slime treatment system for sale

Mine dewatering screen can be used for sand washing in sand and gravel plant, coal slime recovery in coal preparation plant, dry tailings of concentrator, etc. It is also called sand dewatering screen and slime dewatering screen. Tailings dewatering screen is often used in conjunction with thickeners for tailings treatment.

The high-frequency dewatering screen is a sieve that uses its own multiple frequencies for dewatering. It is the latest type of dewatering screen. It is energy-saving, environmentally friendly, low-carbon, and green, and meets the requirements of building a sustainable society. The high-frequency dewatering screen is mainly used in the process of dry tailings discharge, and the effect is extremely obvious. It is a new generation of landmark equipment for dry tailings discharge.

Preparation before installation

⒈Check whether the motor label is in accordance with the requirements. ⒉Measure the insulation resistance with a 500-volt megohm meter. The value should be dried for the stator winding. The drying temperature should not exceed 120℃. ⒊Check the fasteners of the motor to prevent loosening. ⒋Check the motor surface for damage and deformation. ⒌Check whether the rotation is flexible, if there is any abnormality, it should be eliminated. ⒍Check the power supply, whether it is lack of phase, and run it without load for 5 minutes. Installation and adjustment ⒈The motor should be fastened on the installation surface, and the installation surface must be smooth and flat. ⒉The motor can be installed horizontally. ⒊The motor lead adopts four-core rubber cable YZ-500V. The lead-out cable is not allowed to fold sharply when connected to the power supply, and it is reliably fixed with the vibrating body. ⒋The motor should have reliable grounding, there is a grounding device in the motor, the lead end has a mark, and it can also be grounded with a firm foot bolt.

⒌Adjustment of excitation force. Equipment maintenance ⒈Before starting ⑴Check whether the coarse and fine nets are damaged ⑵Check whether the transportation support is dismantled. ⒉ At startup (1) Pay attention to whether there is abnormal noise ⑵ Is the current stable? (3) Is there any abnormality in vibration ⒊After use Regularly check the coarse mesh, fine mesh and springs for fatigue and damage. Check whether all parts of the fuselage are damaged due to vibration. The parts that need to be lubricated must be lubricated.

Comments

Maintenance and storage method of vibrating screen motor and common troubleshooting

The service life of the vibration motor determines the operating life of the entire screen. Therefore, in the normal production, we must always pay attention to whether the working state of the vibrating screen equipment is normal, whether the vibrating motor is in good working condition, timely check and solve some small abnormalities and faults, and do a good job of cleaning and maintenance, because this can greatly increase the vibration screening. Machine and vibration motor life. dewatering screens supplier Maintenance storage precautions during vibrating screen motor operation The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content. 1. It is necessary to pay attention to whether the vibration is abnormal during the use process; 2. Always check if the bolts used in the m...

Fine sand recovery system reduce the sand waste in sand wash

The fine sand recovery system consist of screw sand washing machine , vibrating screen , cyclone. The vibrating Screen was combined with cyclones. Ordinary sand wheel washer or screw sand washing machine can’t process fine sand below 3mm, we researched vibrating screen with cyclone machine. sand recycling system The cyclone is a separation and classification device. When the two-phase mixture to be separated is tangentially introduced into the cyclone from a periphery of the cyclone at a certain pressure, a strong three-dimensional elliptical strong rotational shear turbulent motion is generated. Lzzg's dewatering screen https://www.lzzgmachine.com and sand recovery machine have excellent performance. Compared with Yunnan's local ordinary vibration dewatering screen, the sand washing machine output is twice as high, which greatly improves the production efficiency of the whole line.

300t per hr chalcopyrite washing equipment

Chalcopyrite is a copper-iron sulfide mineral. It often contains trace amounts of gold and silver. Crystals are relatively rare and are tetrahedral-shaped, mostly irregular granular and dense massive aggregates, as well as kidney-shaped and grape-shaped aggregates. Copper yellow, often dark yellow or mottled. The streaks are black with a greenish tint. Chalcopyrite is a relatively common copper mineral, which can be formed in different environments, but it is mainly the product of hydrothermal action and contact metasomatism, and it can often form deposits of a certain scale. The origin is all over the world. In industry, it is the main raw material for copper smelting. In the field of gemology, it is rarely used alone, occasionally as a substitute for pyrite. In addition, it often participates in the composition of some colored stones, inkstones and jade. The high-efficiency spiral chalcopyrite washing machine is mainly used in the washing, grading, impurity removal, and the washing o...

sunset

Search This Blog