Skip to main content

10tph small dewatering screen for sand washing

dewatering screen for small sand washing plant

 

Features of small dewatering screen

1. Using the principle of self-synchronization, the motor drives the vibrator through a tire coupling, with simple structure and low working noise. High working frequency, high vibration intensity, low moisture content of the product on the screen, high unit processing capacity, and high solid recovery rate when used for dewatering tailings.


2. In order to adapt to the difference in the nature of different tailings, the amplitude of this screen is adjustable by adjusting the angle between the main and auxiliary eccentric blocks to meet the dewatering effect of tailings of different properties. The screen surface of the pre-dewatering sieve is installed at 45 degrees from the horizontal, and the dewatering sieve is installed at a negative angle to increase the dewatering area and promote the dehydration of the material as soon as possible to form a filter layer.


3. In order to facilitate maintenance and replacement of the screen surface, the screen surface adopts rail seat installation. The use of polyurethane elastic screen surface, high open rate and elasticity, is conducive to dehydration. The side pressure plate of the screen surface is made of polyurethane material, which has a long life, and the screen surface is fixed and reliable, and can effectively protect the side plate of the screen frame from being washed by materials.


4. The side plate and the beam are connected by torsion shear type high-strength bolts, and there is no welding seam, which avoids the problem of side plate cracking caused by welding stress.


6. The vibrator is an eccentric unit structure, which is easy to disassemble and maintain. The bearing adopts special bearings for vibration equipment to avoid premature damage due to heating.


7. The main welding structural parts are all surface treated, and the surface of the lower beam is beautifully coated with anti-wear coating to prevent the beam from premature wear and break. The steel coil spring is used to reduce vibration, which can greatly reduce the dynamic load of the screen machine on the foundation.


8. The finite element structure analysis software is adopted to ensure that the strength, rigidity and force of the screen frame are reasonable, light weight, and low energy consumption.


9. Users can be equipped with a structure with a bottom frame and a feeding box according to their needs, which is convenient for installation and debugging.

Labels:

Comments

Post a Comment

Popular posts from this blog

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.
Post a Comment
Read more

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...
Post a Comment
Read more

The difference between quartz and mica

Mica and quartz are common minerals that play an important role in mineralogy. Although they are both silicate minerals, there are clear differences between them. First, mica and quartz are very different in appearance. One of its distinguishing features is that mica exhibits a layered structure that can be easily peeled off into thin flakes. Quartz, on the other hand, is a uniform crystal with no layered structure. Additionally, mica is usually dark in color, such as black, brown, or green, while quartz is usually clear or white. Secondly, mica and quartz also differ in their physical and chemical properties. The hardness of mica is usually between 2.5 and 4, which is relatively easy to be scratched; while the hardness of quartz is very high, 7, which is a very hard mineral. In addition, mica has good refractive properties and electrical properties, while quartz is an excellent piezoelectric material.
Post a Comment
Read more