Tailings dry stacking technology in mining

There is many tailings dry stacking process. In order to solve the problem of tailings dehydration, the concentration (concentrator or cyclone) + filter or filter press system was commonly used in the past, but there is a large area, large investment, high power consumption, and use cost Higher issues.

In recent years, a new tailings treatment process that has gradually emerged in China refers to the concentration of the tailings slurry output by the beneficiation process, and then processed by the dehydration vibrating screen equipment. The water content of the product on the screen is usually below 20% and can be directly transferred Go to a fixed location for dry storage.

This process has the advantages of small investment, high efficiency, small footprint, low operating cost, etc. It is currently widely used in the market. If used in conjunction with a filter or filter press, the area of the filter and filter can be greatly reduced. Due to the significant advantages of this process, it was quickly promoted and applied in China.

GP series tailings dry discharge sieve is a vibrating screen specially developed for metal tailings dry discharge based on GZ series high frequency sieve combined with the characteristics of metal tailings, mainly used in iron ore, copper ore, gold Mine, aluminum ore tailings are dehydrated. It is a new type of high-quality tailings recovery equipment designed for the problems of a large number of tailings dry discharge screens in China after sufficient demonstration and research. It has simple structure, low cost, high efficiency, low energy consumption, low noise and easy maintenance Features.

Related post
Sand wash water cleaning system

Comments

Maintenance and storage method of vibrating screen motor and common troubleshooting

The service life of the vibration motor determines the operating life of the entire screen. Therefore, in the normal production, we must always pay attention to whether the working state of the vibrating screen equipment is normal, whether the vibrating motor is in good working condition, timely check and solve some small abnormalities and faults, and do a good job of cleaning and maintenance, because this can greatly increase the vibration screening. Machine and vibration motor life. dewatering screens supplier Maintenance storage precautions during vibrating screen motor operation The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content. 1. It is necessary to pay attention to whether the vibration is abnormal during the use process; 2. Always check if the bolts used in the m...

Fine sand recovery system reduce the sand waste in sand wash

The fine sand recovery system consist of screw sand washing machine , vibrating screen , cyclone. The vibrating Screen was combined with cyclones. Ordinary sand wheel washer or screw sand washing machine can’t process fine sand below 3mm, we researched vibrating screen with cyclone machine. sand recycling system The cyclone is a separation and classification device. When the two-phase mixture to be separated is tangentially introduced into the cyclone from a periphery of the cyclone at a certain pressure, a strong three-dimensional elliptical strong rotational shear turbulent motion is generated. Lzzg's dewatering screen https://www.lzzgmachine.com and sand recovery machine have excellent performance. Compared with Yunnan's local ordinary vibration dewatering screen, the sand washing machine output is twice as high, which greatly improves the production efficiency of the whole line.

300t per hr chalcopyrite washing equipment

Chalcopyrite is a copper-iron sulfide mineral. It often contains trace amounts of gold and silver. Crystals are relatively rare and are tetrahedral-shaped, mostly irregular granular and dense massive aggregates, as well as kidney-shaped and grape-shaped aggregates. Copper yellow, often dark yellow or mottled. The streaks are black with a greenish tint. Chalcopyrite is a relatively common copper mineral, which can be formed in different environments, but it is mainly the product of hydrothermal action and contact metasomatism, and it can often form deposits of a certain scale. The origin is all over the world. In industry, it is the main raw material for copper smelting. In the field of gemology, it is rarely used alone, occasionally as a substitute for pyrite. In addition, it often participates in the composition of some colored stones, inkstones and jade. The high-efficiency spiral chalcopyrite washing machine is mainly used in the washing, grading, impurity removal, and the washing o...

sunset

Search This Blog