Skip to main content

Low energy consumption belt filter press

The belt filter press is widely used in urban sewage treatment, chemical, oil refining, metallurgy, paper making, leather, food, coal washing, printing and dyeing, and other sludge dewatering. The machine runs continuously, with a high degree of automation, energy saving, high efficiency, and maintenance. Convenient, it is the ideal equipment for sludge dewatering.



Typical use of belt filter press; suitable for dehydration of residual activated sludge, digested sludge and mixed sludge; suitable for dehydration of sludge generated by wastewater from papermaking, leather, livestock, aquaculture, chemical, food and other wastes Suitable for dewatering of sewage sludge, suitable for dewatering of metallurgical sludge such as blast furnace, converter, sintering, etc.


The belt filter press has the advantages of compact structure, novel style, convenient operation and management, large processing capacity, low cake moisture content and good effect. Compared with the same type of equipment, it has the following characteristics.

The first gravity dewatering section is inclined, so that the sludge is up to 1700mm from the ground, so that the height of the sludge in the gravity dewatering section increases, and the gravity dewatering ability is improved. The gravity dehydration section is long, and the total length of the first and second gravity dehydration sections is more than 5m, which makes the sludge fully dehydrated and loses its fluidity before pressing. At the same time, the gravity dewatering section is also provided with special mechanisms such as reversal, and the “sweet” and “S” -shaped pressing can make the sludge filter cake obtain the lowest water content. The first dewatering roller adopts "T" type drain tank, which can quickly discharge a large amount of water after squeezing, thereby improving the dewatering effect. The filter belt deviation is equipped with automatic control device, the filter belt tension and the filter belt moving speed can be adjusted freely, the operation and management are convenient, the noise is low, there is no vibration, and the amount of chemical drugs is small.

Comments

Popular posts from this blog

Maintenance and storage method of vibrating screen motor and common troubleshooting

The service life of the vibration motor determines the operating life of the entire screen. Therefore, in the normal production, we must always pay attention to whether the working state of the vibrating screen equipment is normal, whether the vibrating motor is in good working condition, timely check and solve some small abnormalities and faults, and do a good job of cleaning and maintenance, because this can greatly increase the vibration screening. Machine and vibration motor life. dewatering screens supplier Maintenance storage precautions during vibrating screen motor operation The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content. 1. It is necessary to pay attention to whether the vibration is abnormal during the use process; 2. Always check if the bolts used in the m...

Fine sand recovery system reduce the sand waste in sand wash

The fine sand recovery system consist of screw sand washing machine , vibrating screen , cyclone. The vibrating Screen was combined with cyclones. Ordinary sand wheel washer or screw sand washing machine can’t process fine sand below 3mm, we researched vibrating screen with cyclone machine.   sand recycling system The cyclone is a separation and classification device. When the two-phase mixture to be separated is tangentially introduced into the cyclone from a periphery of the cyclone at a certain pressure, a strong three-dimensional elliptical strong rotational shear turbulent motion is generated. Lzzg's dewatering screen https://www.lzzgmachine.com and sand recovery machine have excellent performance. Compared with Yunnan's local ordinary vibration dewatering screen, the sand washing machine output is twice as high, which greatly improves the production efficiency of the whole line.

300t per hr chalcopyrite washing equipment

Chalcopyrite is a copper-iron sulfide mineral. It often contains trace amounts of gold and silver. Crystals are relatively rare and are tetrahedral-shaped, mostly irregular granular and dense massive aggregates, as well as kidney-shaped and grape-shaped aggregates. Copper yellow, often dark yellow or mottled. The streaks are black with a greenish tint. Chalcopyrite is a relatively common copper mineral, which can be formed in different environments, but it is mainly the product of hydrothermal action and contact metasomatism, and it can often form deposits of a certain scale. The origin is all over the world. In industry, it is the main raw material for copper smelting. In the field of gemology, it is rarely used alone, occasionally as a substitute for pyrite. In addition, it often participates in the composition of some colored stones, inkstones and jade. The high-efficiency spiral chalcopyrite washing machine is mainly used in the washing, grading, impurity removal, and the washing o...