Skip to main content

Circular vibrating screen and linear screen, which is more efficient

Both the circular vibrating screen and the linear vibrating screen are motor-driven screening equipment. However, their working principle and suitable materials are also different. When selecting the vibrating screen, it should be selected according to the type of material to be sieved and the particle size. Suitable shaker.

liner-dewatering-screen made by lzzg

Linear screen features

When the linear vibrating screen is working, the trajectory of any point on the screen box is a straight line, that is, when the eccentric block rotates, only one force is generated in a certain direction. Then the vibrating screen only performs a linear motion of the plane reciprocating in this direction. The material enters the feeding port of the screening machine uniformly from the feeder, and several kinds of sieve tops and sieves are produced through the multi-layer screen and are respectively discharged from the respective outlets.

The linear vibrating screen has a large processing capacity and good dewatering effect and is suitable for use in coal preparation, beneficiation, power generation, sugar production, salt production, and other industries for dehydration, de-intermediation, and de-sludge operations.



Circular vibrating screen features


When the circular vibrating screen is working, the movement track at any point on the screen box is a circle. When the eccentric block rotates, the material on the screen is subjected to the impulse of the screen box on the inclined screen surface to generate continuous throwing motion, material and sieve. In the process of face encounter, particles smaller than the mesh are sieved to achieve classification.


The material stays on the circular vibrating screen for a longer period of time and can be sieved to a higher degree. The processing capacity per hour is lower than that of the linear vibrating screen, but a finer screening effect can be obtained. The circular vibrating screen is suitable for aluminum powder, Lead powder, copper powder, ore, manganese dioxide, electrolytic copper powder, electromagnetic materials, abrasive powder, refractory materials, kaolin, lime, alumina, heavy calcium carbonate, quartz sand, food industry, chemical industry, etc.

Related posts

Linear vibrating screen for placer gold washing plant
Vibrating sieve shakers manufacturer direct sales

Comments

Post a Comment

Popular posts from this blog

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...
Post a Comment
Read more

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.
Post a Comment
Read more

How to build a sand and gravel aggregate production line

 High-quality aggregates (coarse aggregates and fine aggregates, fine aggregates are sand): First, the shape of the particles should be good, and the senses should be good; second, the gradation should be reasonable. Especially for machine-made sand, high-quality machine-made sand products must not only meet the sand requirements of commercial concrete, but also meet the requirements of higher standards for ready-mixed mortar sand (ready-mixed mortar is an inevitable requirement in the future. On-site stirring will be phased out over several years). Reasonable continuous grading can meet the needs of high-quality concrete. Both are indispensable. The fifth condition for the success of the sand and gravel aggregate production line is that the aggregate product of the production line must meet the requirements of soil content. High-quality concrete has higher and higher requirements for soil content. The seemingly simple problem may be the reason for the failure of the project. Ther...
Post a Comment
Read more