Skip to main content

Feldspar desliming and washing machine supplier

For feldspar ore produced from feldspathic placer or weathered granite, the ore washing method can be used to remove impurities such as clay, mica, fine mud, etc. The Fe2O3 content of the washed feldspar ore is reduced, and the potassium and Sodium content is increased. The principle of mineral washing is that clay, mica and fine mud have small particle size and small specific gravity, so they settle slowly and can be separated from coarse-grained feldspar under the action of water flow. Ore washing equipment generally uses a washing tank or a vibrating screen. Mining sites generally use washing tanks, and mineral processing plants generally use vibrating screens. Currently, many feldspar ores use this method for impurity removal and purification.

The primary slime in the feldspar mine and the secondary slime produced during the mining process will affect its mineral processing effect, so it must be removed in advance before mineral processing. The process of removing slime is called desliming. In addition, when using amine collectors, the flotation slurry must be deslimed in advance. This is because amine collectors are very sensitive to sludge and are easily adsorbed on the surface of negatively charged sludge particles, which will waste a large amount of collectors. A large amount of viscous foam will also be produced, causing the process to lose selectivity and thus affecting the flotation effect. Commonly used equipment for desliming include centrifuges, desliming buckets, hydrocyclones, etc., which are usually carried out in a single or composite force field.

Comments

Post a Comment

Popular posts from this blog

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...
Post a Comment
Read more

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.
Post a Comment
Read more

The difference between quartz and mica

Mica and quartz are common minerals that play an important role in mineralogy. Although they are both silicate minerals, there are clear differences between them. First, mica and quartz are very different in appearance. One of its distinguishing features is that mica exhibits a layered structure that can be easily peeled off into thin flakes. Quartz, on the other hand, is a uniform crystal with no layered structure. Additionally, mica is usually dark in color, such as black, brown, or green, while quartz is usually clear or white. Secondly, mica and quartz also differ in their physical and chemical properties. The hardness of mica is usually between 2.5 and 4, which is relatively easy to be scratched; while the hardness of quartz is very high, 7, which is a very hard mineral. In addition, mica has good refractive properties and electrical properties, while quartz is an excellent piezoelectric material.
Post a Comment
Read more