Skip to main content

Use and maintenance of banana sieve

The double-layer banana sieve is mainly used for coal grading, desliming, dehydration and de-intermediation, and also suitable for the screening and grading of other minerals. The double-layer banana screen includes side panels, vibration exciters, motors, belt drives, auxiliary shaft pairs, buffer springs, upper sieve plates, lower sieve plates, excitation beams, upper beams, lower beams, lifting beams, etc. Double-layer vibrating sieve for banana sieve. The upper sieve plate has a large inclination angle, and the lower sieve is basically arranged horizontally. This structure can efficiently process a large amount of feedstock through thin-layer screening. The feed material passes through the upper sieve plate at a high speed to make the powder material get preliminary separation. The material moves at high speed on the sieve plate to separate it into thin layers.



Maintenance of banana sieve

Before installation, it is necessary to check whether the parts are intact and complete, and to conduct a thorough cleaning and inspection of the installation foundation of the sieve machine. The embedded steel plates under the four spring support seats must be in the same horizontal plane. After the vibration isolation frame is in place and the vibration isolation spring is adjusted to be perpendicular to the upper and lower supporting surfaces, the spring seat and the lower embedded steel plate can be welded firmly. When welding, only weld both sides of the spring, not both ends of the spring seat. Before installing the vibration isolation spring, check the dimensions and stiffness values ​​to ensure that the stiffness and height of each group of springs are consistent. After the springs are installed, all springs are required to be vertical to the upper and lower supporting surfaces. The exciter and the screen box have been installed at the factory and shipped together. The original assembly condition must be checked at the installation site and the connecting parts must be re-fastened.


The sieve machine should avoid starting with material, and start feeding after it starts and runs smoothly. The feeding should be stopped before stopping, and the sieve can be stopped only after all the materials on the screen surface have passed. During the working process, always check whether the sieve machine is running smoothly. If it is found that the operation is abnormal or there is an impact sound, it should be stopped and checked immediately. In the event of a sudden accident, the material on the screen surface should be removed to avoid starting with materials when the machine is turned on next time, which will affect the service life. Frequently check the abrasion of the sieve plate and liner. If severe abrasion or cracks in key parts are found, they should be replaced or repaired in time.

Comments

Post a Comment

Popular posts from this blog

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.
Post a Comment
Read more

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...
Post a Comment
Read more

The difference between quartz and mica

Mica and quartz are common minerals that play an important role in mineralogy. Although they are both silicate minerals, there are clear differences between them. First, mica and quartz are very different in appearance. One of its distinguishing features is that mica exhibits a layered structure that can be easily peeled off into thin flakes. Quartz, on the other hand, is a uniform crystal with no layered structure. Additionally, mica is usually dark in color, such as black, brown, or green, while quartz is usually clear or white. Secondly, mica and quartz also differ in their physical and chemical properties. The hardness of mica is usually between 2.5 and 4, which is relatively easy to be scratched; while the hardness of quartz is very high, 7, which is a very hard mineral. In addition, mica has good refractive properties and electrical properties, while quartz is an excellent piezoelectric material.
Post a Comment
Read more