Skip to main content

Mud hydro cyclone desander for solid control

Hydrocyclone is a classification device that uses centrifugal force to accelerate the settlement of ore particles. It is widely used in many industrial sectors such as chemical industry, environmental protection, food, medicine, etc., to achieve sand removal, turbidity reduction, and solid-liquid separation in the field of water treatment.


 Features of our hydrocyclone

1. Simple structure and easy installation and operation.

2. Wide application range, good abrasion resistance, long service life, and high efficiency.

3. Strong processing capacity, low operating cost, and high classification accuracy.

Working principle

The carrier fluid mixture enters the hydro cyclone through one or more tangential inlets, causing the fluid to rotate within the device. The cone of the hydro-cyclone accelerates the spiral flow of the fluid, establishes a free vortex, and creates a large centrifugal force. The centrifugal force causes the light material to dissipate to the center of the cyclone, and the dense material is thrown to the outer wall due to the force.

By maintaining the underflow under high pressure, the concentrated oil core of the vortex is forced to countercurrent. As a result, concentrated oil flows to overflow, while oil-free water flows to the bottom.

related product
fine sand recycling machine
Labels:

Comments

Post a Comment

Popular posts from this blog

Sandblasting nozzle classification and use

Using high-pressure air as a power source to drive abrasive particles to hit objects within a certain range will produce a great impact. The function of the sandblasting nozzle is to spray abrasive particles on the object evenly and efficiently. Sandblasting nozzles can be divided into: straight hole sandblasting nozzle, Venturi sandblasting nozzle , double Venturi sandblasting nozzle, angle sandblasting nozzle Straight hole nozzle: There are only contraction section and straight section inside, the structure is simple and easy to manufacture. This kind of nozzle cannot overcome the vortex phenomenon existing at the inlet end, and the pressure loss is large; the abrasive velocity at the outlet is less than 100m/s under the pressure of 0.7MPa.
Post a Comment
Read more

Working principle and parameters of industrial slurry pump

In order for the industrial slurry pump to fully play its role, we need to understand the working principle of the industrial slurry pump: https://www.lzzgmachine.com/products/supporting-equipment/slurry-pump.html Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and gains energy to leave the outer edge of the impeller at a high speed and enter the volute pump shell. In the volute pump case, the Fluid is slowed down due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy. At last, it flows into the discharge pipe and is sent to the place where it is needed. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Above the liquid level of the storage tank is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller. LZZG slurry pump pe...
Post a Comment
Read more

The difference between quartz and mica

Mica and quartz are common minerals that play an important role in mineralogy. Although they are both silicate minerals, there are clear differences between them. First, mica and quartz are very different in appearance. One of its distinguishing features is that mica exhibits a layered structure that can be easily peeled off into thin flakes. Quartz, on the other hand, is a uniform crystal with no layered structure. Additionally, mica is usually dark in color, such as black, brown, or green, while quartz is usually clear or white. Secondly, mica and quartz also differ in their physical and chemical properties. The hardness of mica is usually between 2.5 and 4, which is relatively easy to be scratched; while the hardness of quartz is very high, 7, which is a very hard mineral. In addition, mica has good refractive properties and electrical properties, while quartz is an excellent piezoelectric material.
Post a Comment
Read more