sunset

 A 100 ton per hour silica sand purification plant in cost about 150,000 USD. Product Advantages (1) Extracting the fine material in the raw material slurry firstly can effectively reduce the load of the subsequent equipment and reduce the type of the equipment, thereby achieving the purpose of small investment and small floor space, reducing wear and tear on the equipment and prolonging the service life. (2) The fine sand recovery machine has reasonable waterway design, including backwater regulation and overflow regulation, which makes the recovery effect of the whole machine more ideal. The internal structure of the concentration tank is designed according to the principle of fluid dynamics, fully considering turbulence and settlement. In other aspects, in the case of the same amount of processing, the volume is smaller, and the amount of flocculating agent is more economical; the filter press adopts fully automatic program-controlled pulling plate technology, and a pressure gauge

The green and environment protection sand washing production line is a system solution for the problems of  sand dewatering, tailwater purification, waste dry discharge. The silica sand washing plant mainly includes screening, cleaning, dehydration, fine material recovery, solid-liquid separation, sludge dewatering, and other aspects. The material is effectively screened, washed and dewatered throughout the system. Save resources and reduce water consumption. The entire production line has excellent continuous working performance and convenient maintenance. Long service life, easy to move and excellent effect. At the same time, it ensures no pollution and meets environmental protection requirements. A 300ton per hour silica sand purification plant in cost about 500,000 USD. The green and environment protection sand washing production line is a system solution for the problems of  sand dewatering, tailwater purification, waste dry discharge. The silica sand washing plant mainly include

The deep cone sludge thickener is based on the traditional vertical flow sedimentation tank. The structure of the internal feed cylinder is improved, the efficiency of sedimentation is greatly improved, the plane of the sludge thickening tank body is circular, and the suspended solids settle under gravity. In the bottom of the tank, the clarified water is discharged from the overflow weir around the upper end of the tank. The overflow port is provided with a scum filter device and a baffle to ensure the effluent water quality, the underflow concentration is up to 70%, and the treatment capacity is 3-8 times higher than that of the conventional concentrator. sludge thickener manufacturer

Vibrating feeder also called vibratory feeder is made of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator consists two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. By drive of the motor, the two eccentric shafts start rotating to generate a linear huge power which forces the feeder to vibrate back and forth. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller material will fall down, avoiding the further crushing, so screening purpose is reached. Product Features 1.Smoothly vibrating and long service life. 2.Vibrating force adjustable, easy to operation. 3. Low noise and power consumption. 4. Simple structure, easy to maintenance.