Skip to main content

Coastal zircon titanium ore dressing

Coastal zircon titanium ore dressing process

1. Grinding

Grinding is the process of crushing and grinding the original ore to meet the particle size requirements of the subsequent mineral processing process. Commonly used equipment includes ball mills, rod mills, etc., which use mechanical force to crush and grind the ore.

2. Roughing

Roughing is the process of preliminarily separating useful minerals from useless minerals in the raw ore to improve the grade of the ore. Commonly used methods include gravity separation, flotation, magnetic separation, etc., which separate the ore by different physical properties.

3. Concentration

Concentration is to further separate and purify the roughing products on the basis of roughing to further improve the grade and recovery rate of the ore. Commonly used methods also include flotation, gravity separation, magnetic separation, etc.

Comments

Popular posts from this blog

Maintenance and storage method of vibrating screen motor and common troubleshooting

The service life of the vibration motor determines the operating life of the entire screen. Therefore, in the normal production, we must always pay attention to whether the working state of the vibrating screen equipment is normal, whether the vibrating motor is in good working condition, timely check and solve some small abnormalities and faults, and do a good job of cleaning and maintenance, because this can greatly increase the vibration screening. Machine and vibration motor life. dewatering screens supplier Maintenance storage precautions during vibrating screen motor operation The equipment can not be completely dust-free, but also has a harsh environment and dusty conditions. The vibration motor is airless and heat-cooled. It relies on natural cooling, so it must be specially maintained. The following is the maintenance content. 1. It is necessary to pay attention to whether the vibration is abnormal during the use process; 2. Always check if the bolts used in the m

What equipment is used for kaolin screening

Because kaolin is easy to disperse and suspend in water, the screening process of kaolin vibrating screen is wet screening. First, the kaolin ore is made into a slurry of micron-level or smaller unit particles, and a dispersant is appropriately added to make the minerals in the water. Dissociation, so that the high collar stone and impurity minerals in the kaolin will be divided into three different grades of fine, medium and coarse, and then the pure kaolin ore will be sieved out through the grading action of the vibrating screen. This series dewatering screen output lower water content kaolin, hot sell in the market. LZZG use PU screen as its new type sand washer sieve, because its long service life and not easily blocked in screening. When processing coal mud or dirt mixed water, steel mesh is easily blocked and adjusting its mesh size will highly reduce its capacity. Technical parameters Model Feed Size (mm) Capacity (t/h) Screen Panel (mm) Screen Area (m²) Power (kw) Weight (kg)

lowcost sand washing waste water treatment system

Low-cost sand washing production wastewater and sludge treatment project overview: The sand washing wastewater is 300m3 / d and the sludge is 30m3 / d. The main production of construction water washing sand primary products. A water-washing sand production line with a daily production capacity of 150 tons will crush, screen, and wash nearby sandstone, silica, etc. to produce construction water-washing sand products. The main environmental pollution problem in the production process of the project is the sludge wastewater and domestic sewage generated by washing sandstone and silica rock. According to the requirements of relevant laws and regulations, sand and stone washing wastewater and domestic sewage must be discharged or recycled after treatment, and the washing sludge should be properly disposed of. The tailings can be exported as good paving gravel. Total wastewater: about 300 m3 / d of washing production wastewater. The main pollutants are characterized by a larg