sunset

  Features Of DMC 1. The separation efficiency of the heavy medium cyclone is relatively higher than that of the ordinary hydrocyclone, which is also one of the important factors that people like to use it. 2. The adjustment range of the separation density of the heavy medium cyclone is relatively wide: the separation density of the heavy medium coal separation is generally 1300 kg/m3 ~ 2200 kg/m3 and it is also convenient to adjust this is its advantage. 3. The heavy-medium cyclone has a relatively strong use capacity and not only has a wide range of sorting strength, but also has a good effect on the quantity and quality of coal preparation. 4. The sorting particle size range is wide. The size limit of the lump coal separator is generally 100-6mm, and the particle size limit of the fine coal heavy medium cyclone is 50-0mm (the sorting depth can reach 0.15mm). 5. The heavy medium cyclone has large processing capacity, the current maximum processing capacity of the heavy medium separat

Screw classifier is used in the dressing plant to match with the ball mill to distribute the ore sand, or in the gravity dressing plant to classify the ore and mud. The particle size classification of the slurry in the metal beneficiation process and the desilting and dewatering of the washing Wait for homework. This machine has the characteristics of simple structure, reliable work and convenient operation. The screw classifier is mainly composed of a transmission device, a spiral body, a trough body, a lifting mechanism, a lower bearing (bearing bush) and a discharge valve. The water tank of the machine is installed obliquely. The inclination angle is determined according to the equipment configuration in the process flow. The transmission device drives the screw to rotate in the groove. After the fine slurry is fed into the groove from the side feeding inlet, a lower end is formed at the groove. The surface area and volume of the slurry settlement area are determined by the inclinat

Tailing is one of the products of the sorting operation in the beneficiation, in which the part with the lowest content of useful target components is called tailings.  Tailings are not completely useless waste, and often contain components that can be used for other purposes and can be comprehensively utilized. Achieving no waste discharge is a requirement for the full utilization of mineral resources and the protection of the ecological environment. Tailing drying screen is designed for the dewatering of tailings. Technical characteristics of tailings dewatering screen: 1. High working frequency, high vibration intensity, low moisture content of the product on the screen, high unit processing capacity, and high solid recovery rate when used for dewatering tailings. 2. Using the principle of self-synchronization, the motor drives the vibrator through a tire coupling, with simple structure and low working noise. 3. Installation with negative inclination angle, the screen surface of the